Contact Us

Contact Us
Tel: +86-592-5393051-815
Fax: +86-592-5393061 
Wechat: +86-15359025653
Skype: Liz.wangL 
Attn: Mr.Zayed Wu, Ms.Liz Wang 
Email:Liz.wangL@cerarock.com  
Current Location:HomePage> Products Catalogue

TD-P343



    DescriptionSize (mm)㎡/CTNPCS/㎡KG/CTN20GP QTY
    Split Brick60*240*3.5660217392㎡ (carton)
    Rustic Brick60*220*3.5662216000㎡ (carton)
    Other Designs600*300*4-54.55.55254680㎡ (carton)
    Other Designs1200*600*4-5///4233.6㎡ (pallet)
    Size and colors can be customized.

    Installation for reference (more details please contact):   
    1.Establish and mark horizontal / vertical setting out lines on the wall.
    2.Use a hand trowel to spread a thin even layer of the recommended tile adhesive to fully cover the back of  Flexible Tile. 
    3.Use a suitable notch trowel held at 45 degrees angle over the adhesive layer previously applied to creat a series of parallel ribs for solid bed adhesive coverage. 
    4. With the setting out lines as a guide, install the Flexible Tiles into position by using the plastic tamping board to ensure full adhesive contact with the wall surface. 
    5.After filling joints with the recommended grout and upon initial curing, scrape off excess grout followed by final cleaning with a damp sponge. 
    6.Using a dry sponge to remove the ashes.
    previous item: TD-P345 next item: TDP-343